Maintenance method of hydraulic turnout tamping machine

The care and maintenance of the hydraulic turnout tamping machine is very important to maintain its good working condition and extend its service life. Here are some suggestions:

1. Regular inspection and tightening: Regularly inspect various components of the hydraulic turnout tamping machine, including fasteners and connections, to ensure that they are not loose or damaged. Some key connections, such as cylinders, piston rods and guide rods, should be tightened regularly to maintain their stability.

2. Cleaning and rust removal: Regularly clean the surface and internal parts of the hydraulic turnout tamping machine to remove dust, dirt and other impurities. For some parts that are prone to rust, such as cylinders, piston rods and guide rods, anti-rust treatment should be carried out to prevent rust.

3. Grease maintenance: According to the instructions for use of the equipment, replace or add grease regularly. For some equipment that requires frequent use, the quality and liquid level of the grease should be checked regularly to ensure that the equipment is fully lubricated.

4. Hydraulic system inspection: Check the sealing performance, pressure and flow of the hydraulic system to ensure that the system has no leaks, stable pressure and sufficient flow.

5. Operating specifications: During operation, the instructions and operating specifications of the equipment should be followed to avoid illegal operations and excessive use. At the same time, good working habits should be maintained, such as regular inspection, recording and maintenance of equipment.

6. Storage and protection: When the hydraulic turnout tamping machine is not needed, it should be stored in a dry and ventilated place, and necessary protective measures should be taken, such as covering, packaging, etc., to avoid damage or contamination of the equipment.

Through regular maintenance and upkeep, you can ensure that the hydraulic turnout tamping machine is in good working condition and extend its service life. At the same time, it can also reduce failure rates and maintenance costs, and improve work efficiency and safety.